E –5 – Nikon SB-910 User Manual

Page 87

Advertising
background image

E–5

E

Functions

Setting flash head tilting/rotating angles, and

choosing a reflecting surface

Good results are most easily achieved when the flash head is tilted up to use the

•

ceiling as a reflecting surface.
Rotate the flash head horizontally to get the same effect when the camera is held

•

in the vertical position.
Illumination can be softened further when the light is bounced off a ceiling or

•

wall behind the camera, as opposed to in front of the camera.
Select white or highly reflective surfaces to bounce the light off. Otherwise,

•

image colors will be influenced by the color of the reflecting surface.
Take care not to let light from the flash unit illuminate the subject directly.

•

The effective distance between the flash head and the reflecting surface is

•

approx. 1 m to 2 m (3.3 ft to 6.6 ft) depending on photographic conditions.
If the reflecting surface is not close enough, a piece of A4-size white paper can

•

be used instead. Please check the subject is exposed to the bounced light before
taking a picture.

1-2m

90º

White ceiling

Flash head tilted up 75˚
while rotated 180˚

Lightproof white paper

Advertising