Warning indicators, H –2, Tips on speedlight care and reference information – Nikon SB-910 User Manual

Page 113

Advertising
background image

H–2

H

Tips on Speedlight Care and Reference Information

Problem Cause

Solution

0

Remote fl ash unit
does not fi re.

The distance between the
master fl ash unit and the
remote fl ash unit is too
long, or there is an obstacle
between them.

Redo the setup of the master
fl ash unit and remote fl ash
units.

D-17

The light from the master
fl ash unit does not enter the
remote fl ash unit light sensor
window for wireless remote
fl ash.

The SB-910 does not
work properly.

Microcomputer may have
malfunctioned if this occurs
even when fresh batteries are
properly installed.

Replace the batteries while

the SB-910 is on.
If the problem continues,

contact your retailer or
Nikon representative.

B-6

Nonstandard display

Dials or buttons do
not operate.

Key lock is activated.

Cancel key lock.

B-4

The SB-910 does not
operate.

Thermal cut-out is active.

Wait until the SB-910 cools
down.

E-23

Warning indicators

Warning indicator

Cause

Solution

0

Low battery power
indicator appears.

All operations have stopped
due to low battery power.

Replace the batteries.

B-7

Thermal cut-out indicator
appears.

The fl ash function is
canceled, and all operations
except power ON/OFF and
custom settings have been
suspended because the
SB-910 has overheated and
could become damaged.

Allow the SB-910 to cool
down.

E-23

Advertising