Sony VGN-U750P - Manual (Page 98)

98
Connecting peripheral devices
Connecting a computer display
You can connect a computer display (monitor) either via the port replicator or the display/LAN adapter.
To connect a computer display, proceed as follows:
1 If necessary, plug one end of the display's power cord (1) into the display, and the other end into an AC outlet.
2 Plug the display cable (2) (not supplied) into the monitor/VGA connector (3) on the port replicator or the display/LAN adapter.
✍
In certain circumstances, you may not be able to display the computer LCD screen
and an external display at the same time.
✍
You can toggle the output between the computer LCD-screen and the external
monitor by pressing the button on the port replicator or the display/
LAN adapter.