Sony VGN-U750P - Manual (Page 99)

99
Connecting peripheral devices
Connecting a projector
You can connect a projector (such as the Sony LCD projector) either via the port replicator or the display/LAN adapter.
To connect a projector, proceed as follows:
1 Connect the power cord (1) of the projector into an AC outlet.
2 Plug the RGB signal cable (2) into the monitor/VGA connector (3) on the port replicator or the display/LAN adapter.
3 Plug the audio cable (4) (not supplied) into the earphone connector (5) .
4 Plug the RGB signal cable and the audio cable into the connectors on the projector (6).