Sony STR-DN1040 - Manual (Page 12)

12 US
A Input indicator
Lights up to indicate the current input.
HDMI
The receiver recognizes the equipment
connected via an HDMI IN jack.
ARC
TV input is selected and the Audio
Return Channel (ARC) signals are
detected.
COAX
Digital signal is input through the
COAXIAL jack (page 86).
OPT
Digital signal is input through the
OPTICAL jack (page 86).
B PARTY
Lights up when PARTY
STREAMING function is activated
(page 72).
C S.OPTIMIZER
Lights up when Sound Optimizer
function is activated (page 59).
D D.C.A.C.
Lights up when the measurement
results of the “Auto Calibration”
function are applied.
E Dolby Digital Surround indicator*
Lights up the respective indicator
when the receiver is decoding the
corresponding Dolby Digital format
signals.
F DTS(-HD) indicator *
Lights up the respective indicator
when the receiver is decoding the
corresponding DTS format signals.
G Speaker system indicator
(page 39)
H Tuning indicator
ST
Lights up when the receiver tunes to a
stereo broadcast.
MEM
Lights up when memory function, such
as Preset Memory (page 54), etc., is
activated.
I HDMI OUT A + B (page 85)
J SLEEP
Lights up when the Sleep Timer is
activated (page 16).
K EQ
Lights up when the equalizer is
activated.
L D.L.L.
Lights up when the Digital Legato
Linear (D.L.L.) function is activated
(page 97).
M D.R.C.
Lights up when dynamic range
compression is activated (page 99).
Indicators on the display panel
Dolby Digital
TrueHD Dolby TrueHD
DTS DTS
DTS-HD DTS-HD