Configuring the network settings of the receiver, Configuring the network settings, Of the receiver – Sony STR-DN1040 User Manual

Page 39: E 39, Using a wireless lan connection

Advertising
background image

39

US

Prep

ari
n

g

th
e

Recei

ver

Depending on the characteristics of the
subwoofer you are using, the setup distance value
may be different from the actual position.

To select the front speakers

You can select the front speakers you want
to drive.
Be sure to use the buttons on the receiver to
perform this operation.

Press SPEAKERS repeatedly to select
the front speaker system you want to
drive.

You can confirm the selected speakers
terminals by checking the indicators on the
display panel.

* To select “SP B” or “SP A+B”, set the

assignment for the SPEAKERS SURROUND
BACK/BI-AMP/FRONT HIGH/FRONT B
terminals to “Front B Speakers” by using the
“Speaker Connection” in the Speaker Settings
menu (page 95).

This setting is not available when headphones are
connected.

To cancel Auto Calibration

The Auto Calibration function will be
canceled when you perform the following
during the measurement process:
– Press ?/1.
– Press the input buttons on the remote

control or turn the INPUT SELECTOR
on the receiver.

– Press .
– Press SPEAKERS on the receiver.
– Change the volume level.
– Connect the headphones.

To set up the receiver
manually

See “Adjusting Settings” (page 90).

Configuring the network
settings of the receiver

The network settings for the receiver must
be set correctly to use the Home Network,
SEN, AirPlay, and PARTY STREAMING
functions.

There are several connecting methods you
can use to set up a wireless network:
searching for an access point, using a WPS
connecting method (either the push-button
method or the PIN code method), or
manual setting.

Note

Indicators

Selected speakers

SP A

The speakers connected to the
SPEAKERS FRONT A
terminals.

SP B*

The speakers connected to the
SPEAKERS SURROUND
BACK/BI-AMP/FRONT
HIGH/ FRONT B terminals.

SP A+B*

The speakers connected to
both the SPEAKERS FRONT
A and SPEAKERS
SURROUND BACK/
BI-AMP/FRONT HIGH/
FRONT B terminals (parallel
connection).

“SPK OFF” appears on the
display panel. No audio
signals are output from any
speaker terminals.

SPEAKERS

Note

Using a wireless LAN
connection

Advertising