Sony STR-DN1040 - Manual (Page 13)

13 US
N NEO:6
Lights up when DTS Neo:6 Cinema/
Music decoding is activated (page 56,
57).
O Dolby Pro Logic indicator
Lights up the respective indicator
when the receiver performs Dolby Pro
Logic processing. This matrix
surround decoding technology can
enhance input signals.
These indicators may not light up depending
on the speaker pattern setting.
P ZONE 2
Lights up while operation in zone 2 is
being enabled.
Q A.P.M.
Lights up when the A.P.M. (Automatic
Phase Matching) function is activated.
You can only set the A.P.M. function
in the DCAC (Digital Cinema Auto
Calibration) function (page 95).
R UPDATE
Lights up when a new software is
available (page 75).
S Wireless LAN signal strength
indicator
Lights up to show the strength of the
wireless LAN signal (page 41, 42).
T BT
Lights up when Bluetooth device is
connected (page 80).
U Wired LAN indicator
Lights up when LAN cable is
connected.
V USB
Lights up when iPod/iPhone or USB
device is detected.
* When playing a Dolby Digital or DTS format
disc, make sure that you have completed the
digital connections and that INPUT MODE is
not set to “ANALOG” (page 86) or “2ch
Analog Direct” is not selected.
PL Dolby Pro Logic
PLII Dolby Pro Logic II
PLIIx Dolby Pro Logic IIx
PLIIz Dolby Pro Logic IIz
Note
No signal.
The signal strength is weak.
The signal strength is
moderate.
The signal strength is strong.