Balboa Water Group Revolution - Manual (Page 16)

Revolution
Transforming the Control of Hot Tubs
16
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,
834 b2, Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
Top-Side Panel Installation
TIP
Choosing a Location for the Topside Panel
t 4FMFDU
B
MPDBUJPO
UIBU
JT
FBTJMZ
BDDFTTJCMF
5IF
VTFS
TIPVME
CF
BCMF
UP
SFBDI
UIF

panel without stretching or getting into an awkward position.
t 5IF
mounting location should allow the user to see all of the visual indicators
and display features of the topside panel without strain.
t #FGPSF
ESJMMJOH
UIF
DVUPVU
PG
UIF
QBOFM

UFTU
UP
TFF
UIBU
UIF
PSJFOUBUJPO
PG
UIF


topside panel is correct. Also, be sure that the cable reaches the control
system without stretching or being forced against any sharp corners.
t )PME
UIF
UPQTJEF
QBOFM
BU
UIF
EFTJSFE
NPVOUJOH
MPDBUJPO
BOE
SPVUF
UIF


connecting cable toward the control system to determine that the cable is long
enough to allow it to be connected inside of the unit.
t5IF
mounting area must be above the maximum water level of the spa and
in an area with good drainage to prevent the accumulation of any water. The
topside panel should not be submerged.
t *G
UIF
UPQTJEF
QBOFM
NVTU
CF
NPVOUFE
VOEFSOFBUI
B
TQB
DPWFS

TFMFDU
B

mounting location that will prevent the cover from resting directly upon the
panel, but will allow the cover to seal when closed.
READY RANGE FLTR1
JETS S J S J AUX UX X LIGH LIGHT G H HEAT AT T JETS AUX LIGHT HEAT
TP600
(55673-05)
TP400T
(50260)
TP400W
(50259)