Balboa Water Group Revolution - Manual (Page 77)

Revolution
Transforming the Control of Hot Tubs
77
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,
834 b2, Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
Plumbing Kit Options
Tailpiece Kit and Circ Pump Insert Kits
2” TAILPIECE KIT, PART No. 55911
Standard 2” sockets to glue up to 2” PVC pipe.
1.5” TAILPIECE KIT, PART No. 55914
1.5” sockets to glue up to 1.5” PVC pipe with the I.D.
Be sure to orient the fittings so that the insert is at the 12:00
position to prevent trapped air.
1” CIRC PUMP INSERT KIT, PART No. 55912
1” barb fittings for use with 1” tubing. Be sure to orient the
fittings so that the insert is at the 12:00 position to prevent
trapped air.
1” CIRC PUMP INSERT KIT, PART No. 55913
One fitting for direct coupling to the threaded suction of an
appropriately-sized circ pump. A 1” barb fitting for use with 1” tubing
is used on the other end of the heater. Be sure to orient the fittings so
that the insert is at the 12:00 position to prevent trapped air.