Revolution, Exiting priming mode – Balboa Water Group Revolution User Manual
Page 27
Revolution
Transforming the Control of Hot Tubs
27
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,
834 b2, Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
Exiting Priming Mode
Once the system has exited Priming Mode, it takes approximately 1 minute of
water flowing through the heater before water temperature is determined and
then displayed.
After successfully priming the system (or exiting Priming Mode), configure the
system by setting filtration times, dual temperature ranges, and so on.
It is recommended that the time be set first.