Balboa Water Group Revolution - Manual (Page 24)

Revolution
Transforming the Control of Hot Tubs
24
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,
834 b2, Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
RUN PMPS PURG AIR ----
When this menu appears, the system is asking what you would like to do. You
have 3 options:
If the spa does not need to be primed, Priming Mode can be exited by t

pressing any TEMP button.
Do nothing. ( t
Priming Mode terminates within 4 - 5 minutes.)
Manually initiate Priming Mode. t

NOTE: Priming Mode can be bypassed if the system does not need to be
primed. Priming Mode is necessary only if the spa is refilled and if there’s the
possibility of air being in the system.
JETS TS S J AUX X LIG LIGHT H HEAT T AT JETS AUX LIGHT HEAT
Exits Priming Mode
Run pumps to purge the air
Pressing a TEMP button after start up exits the priming mode sequence.
The display may not show the water temperature immediately, yet will appear
once polling takes place.