Revolution, If the pumps have not primed, Transforming the control of hot tubs – Balboa Water Group Revolution User Manual
Page 26

Revolution
Transforming the Control of Hot Tubs
26
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,
834 b2, Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
If the Pumps have not Primed
TIP
t *GUIFQVNQTIBWFOPUQSJNFEBGUFSNJOVUFT BOEXBUFSJTOPUGMPXJOHGSPN
the jets in the spa, do not allow the pumps to continue to run. Turn off the
pumps and repeat the process.
Turning the power off and back on again will initiate a new pump priming
t
session. Sometimes momentarily turning the pump off and on will help it
to prime.
Do not do this more than 5 times. If the pump(s) will not prime, shut off the
t
power to the spa and call for service.
JETS
TS
J
AUX
UX
LIG
GH
LIGHT
T
H
HEAT
T
AT
JETS
AUX
LIGHT
HEAT
JETS
TS
J
AUX
UX
LIGH
LIGHT
T
H
HEAT
T
AT
JETS
AUX
LIGHT
HEAT