Festo Кабели и принадлежности - Manual (Page 63)

Internal I/O addresses in record select mode
The configured outputs of the master are mapped on
the input bits (I10.0 ... I13.15).
Input bits (I10.0 ... I11.15)
1)
Byte Bit 7
Bit 15 Bit 6
Bit 14 Bit 5
Bit 13 Bit 4
Bit 12 Bit 3
Bit 11 Bit 2
Bit 10 Bit 1
Bit 9 Bit 0
Bit 8
n
n+1 -
- -
- -
- CLK_B
- CLK_A
- Stop
- Reset
- Enable
-
n+2
n+3 -
Recbit8 -
Recbit7 -
Recbit6 -
Recbit5 -
Recbit4 -
Recbit3 Recbit10
Recbit2 Recbit9
Recbit1
1)
Address assignment as seen by the SPC200
The internal outputs of the field bus module are
mapped on the configured inputs of the master.
Output bits (Q10.0 ... Q10.15)
1)
Byte Bit 7
Bit 15 Bit 6
Bit 14 Bit 5
Bit 13 Bit 4
Bit 12 Bit 3
Bit 11 Bit 2
Bit 10 Bit 1
Bit 9 Bit 0
Bit 8
n
n+1 -
- -
- -
- RC_B
- RC_A
- ACK_B
- ACK_A
- Ready
-
1)
Address assignment as seen by the SPC200
4. Commissioning
SPC200-COM-IBS 0503a 4-29