Festo Параллельный захват HGPM - Manual (Page 11)

HGPM-...-G..
Festo HGPM-...-G.. 0103NH English
11
Micro parallel gripper type HGPM-...-G.. English
1 Operating parts and connections
3 1
7 5 6
2
6 6
2 4 2
1
Trunnion with clamping surface for fastening the gripper (only with HGPM-...-G8)
2
Threaded bore for compressed air connection
3
Flange thread and centring hole for fastening the gripper (only with HGPM-...-G9)
4
Stroke compensation with through holes for fastening the gripper (only with
HGPM-...-G6)
5
Locking ring for limiting stroke compensation (only with HGPM-...-G6); must not be
released
6
Gripping jaws with toleranced groove for fitting gripper fingers (gripper fingers not
included)
7
Threaded bores in toleranced groove for fitting gripper fingers
Fig. 1