WIKA LSO.25 - Manual (Page 18)

18 WIKA operating instructions models LSO.06, LSO.25
13334603.01 09/2010 GB/D/F/E
4. Design and function
GB
Alternatively the coding can take place directly in the female connector (rack side) and the
associated male connector (switching amplifier side) after the following coding plan:
The coding pin is inserted with a tool captive in the appropriate place in the female
connector and at the opposite side in the male connector is a drilling.
■ In mounted case
4.3 Scope of delivery
Cross-check scope of delivery with delivery note.
trans
-
ducer
75 high
Fuse
M20 x 1.5 or M16 x 1.5
time delay on
time delay off
time delay
Supply
Failure
Signal