WIKA LSO.25 - Manual (Page 5)

WIKA operating instructions models LSO.06, LSO.25 5
13334603.01 09/2010 GB/D/F/E
1. General information / 2. Safety
GB
Information
... points out useful tips, recommendations and information for efficient and
trouble-free operation.
DANGER!
...identifies hazards caused by electric power. Should the safety instructions
not be observed, there is a risk of serious or fatal injury.
WARNING!
... indicates a potentially dangerous situation in a potentially explosive
atmosphere, resulting in serious injury or death, if not avoided.
2. Safety
WARNING!
Before installation, commissioning and operation, ensure that the
appropriate instrument has been selected in terms of measuring range,
design and specific measuring conditions.
Serious injuries and/or damage can occur should these not be observed.
Further important safety instructions can be found in the individual chapters
of these operating instructions.
2.1 Intended use
The model LSO.06 transducer is used for limit value detection in liquids. The
model LSO.25 switching amplifier may be used in conjunction with the model LSO.06
transducer for overflow control. The instruments are very robust and designed for rough
operating conditions.
These instruments have been designed and built solely for the intended use described
here, and may only be used accordingly.
The technical specifications contained in these operating instructions must be observed.
Improper handling or operation of the transducer and the switching amplifier outside of its
technical specifications requires the instrument to be shut down immediately and inspect-
ed by an authorised WIKA service engineer.
The manufacturer shall not be liable for claims of any type based on operation contrary to
the intended use.