Cirrus Logic EP7312 - Manual (Page 37)

DS508F2

Copyright Cirrus Logic, Inc. 2011
(All Rights Reserved) 37
EP7312
High-Performance, Low-Power System on Chip
*
“With p/u” means with internal pull-up of 100 KOhms on the pin.
† Strength 1 = 4 ma
Strength 2 = 12 ma
‡
Input. Port A,B,D,E GPIOs default to input at nPOR and URESET conditions.
206 nCS[2] 1 High O Chip select 2
207 nCS[3] 1 High O Chip select 3
208 nCS[4] 1 High O Chip select 4
Table 20. 208-Pin LQFP Numeric Pin Listing (Continued)
Pin
No.
Signal
Strength
† Reset
State
Type Description