Asante Technologies 5308F - Manual (Page 27)

Factory Defaults
Page 1-11
Factory
Defaults
The IntraSwitch 5308FL is shipped with the following factory
default settings:
Table 1-2 Factory Default Configurations
Configuration Default Setting
IP address 0.0.0.0
▲ Important! The first IP address that is
assigned to the IntraSwitch 5308FL becomes
the new factory default setting.
Subnet Mask 0.0.0.0
▲ Important! The first subnet mask that is
assigned to the IntraSwitch 5308FL becomes
the new factory default setting.
Default Gateway 0.0.0.0
▲ Important! The first default gateway
address that is assigned to the IntraSwitch
5308FL becomes the new factory default
setting.
Switching Mode Store-and-forward
10Base-FL Ports Half Duplex
10/100TX Port Auto-Negotiation enabled; auto-negotiates to
10 or 100Mbps half duplex
MII Expansion Ports 100Base-FX module: half duplex
10/100TX module: auto-negotiates to 10 or
100Mbps half duplex
10Base-FL module: half duplex
Spanning Tree Enabled on ALL ports