Asante Technologies 5308F - Manual (Page 64)

Console Management
Page 5-8
Table 5-4 Configuration Menu Items
Menu Item Description
Config System
Administration
Information
Displays and allows you to change the
name, location, and contact information
for the IntraSwitch 5308FL.
See “Configure System Administration
Information” on page 5-10.
Config TCP/IP
Parameters
Displays and allows you to change the
information needed to access the
IntraSwitch 5308FL over the network (via
in-band management).
See “Configure TCP/IP Parameters” on
page 5-12.
Config Bootstrap
Parameters
Displays and allows you to change the
parameters used for downloading a new
version of software for the IntraSwitch
5308FL.
See “Configure BootStrap Parameters”
on page 5-14.
Config SNMP
Parameters
Displays and allows you to change the
IntraSwitch 5308FL’s SNMP (Simple
Network Management Protocol)
parameters; such as, read/write settings,
trap authentication, and trap receivers.
See “Configure SNMP Parameters” on
page 5-18.
Config Port Parameters Allows you to manually configure each of
the IntraSwitch 5308FL’s ports for speed,
connection, link mode, and auto-
negotiation.
See “Configure Port Parameters” on
page 5-22.
Config RMON
Parameters
Displays and allows you to change the
IntraSwitch 5308FL’s RMON parameters.
See “Configure RMON Parameters” on
page 5-26.