Asante Technologies 5308F - Manual (Page 46)

LED Indicators
Page 3-2
LED Indicators
The IntraSwitch 5308FL has five rows of LEDs on its front panel
that convey the status of each 10Base-FL port as well as the
status of the 10/100TX port and MII expansion ports (if
installed). See Figure 3-1.
The five rows of port LEDs display:
❏ 100 Mbps operation
❏ Max Util (maximum utilization)
❏ FDP/COL (full duplex or collision)
❏ Data
❏ Link
Figure 3-1 IntraSwitch 5308FL LED panel
The IntraSwitch 5308FL also has four diagnostic LEDs. These
LEDs are not labeled on the unit’s front panel. They light when
the IntraSwitch 5308FL is first powered on or is reset.
▲
Important! The diagnostic LEDs are not
labeled on the IntraSwitch 5308FL’s front panel.
See “Diagnostic LEDs” on page 3-4 for more information.
IntraSwitch 5308FL
Pwr 100 Mbps
Max Util
FDP / COL
Data
Link
10/100 1 2 3 4 5 6 7 8 MII 1 MII 2
10/100
Uplink
Port LEDs
Power
LED
Diagnostic LEDs (not labeled on the unit)