Asante Technologies 5308F - Manual (Page 67)

Configure System Administration Information
Page 5-11
Changing System Administration Information
To change the IntraSwitch 5308FL’s name, location, or
contact information:
1 Open the System Administration Information
Menu by typing
a in the Configuration Menu.
2 Type the command letter of the option you
want to change.
For example, type n to set the switch name.
3 Type the information at the prompt.
See Table 5-5 for a description of each param-
eter.
▲
Important! Each parameter is limited to
64 characters (including spaces).
To cancel a selected option, press ctrl-c at
the command prompt.
4 Press return.
The IntraSwitch 5308FL’s system administra-
tion information is configured.
To quit and return to the Configuration
Menu, type
q.