Asante Technologies 5308F - Manual (Page 70)

Console Management
Page 5-14
Configure Bootstrap Parameters
This menu displays and allows you to change the bootstrap
parameters used for loading the IntraSwitch 5308FL’s software
at startup and for downloading a new version of software when
one is issued.
To access the Bootstrap Parameters Menu, type b from the
Configuration Menu. The following menu appears:
Figure 5-6 BootStrap Parameter Menu
▲
Important! The IntraSwitch 5308FL’s default
Load Mode setting is
Local.
Normally, the bootstrap settings never need to
be changed except when downloading a new
version of the IntraSwitch 5308FL’s software.
Current Settings
Table 5-7 explains each setting on the Bootstrap Parameter
Menu.
For information on using the menu, see:
❏ “Executing Software Locally” — page 5-16
❏ “Loading Software Remotely” — page 5-16
❏ “Performing a Software Upgrade” — page 5-
17
Current Settings