Asante Technologies 5308F - Manual (Page 30)

Installation
Page 2-2
Installing the IntraSwitch
Installation
Guidelines
Before installing the IntraSwitch 5308FL, carefully review the
following guidelines.
Power Requirements
The source electrical outlet should be installed near the
IntraSwitch 5308FL, be easily accessible, and be properly
grounded.
Make sure the power source adheres to the following
guidelines:
❏ Voltage range: 100 to 240 VAC
❏ Frequency range: 60/50 Hz
❏ Maximum current: 1.6 A
Environmental Requirements
The IntraSwitch 5308FL must be installed in a clean, dry, dust-
free area with adequate air circulation to maintain the following
environmental limits:
❏ Temperature: 0
°
to 45
°
C
❏ Relative Humidity: 5% to 85% non-condensing
Avoid direct sunlight, heat sources, or areas with high levels of
electro-magnetic interference.
Cooling and Airflow
The IntraSwitch 5308FL has two internal fans that cool the
interior by drawing air through vents on the sides and forcing
heated air out through holes in the rear.
▲
Important! Do not restrict air flow by covering
or obstructing air vents on the sides of the case.