Lenovo ThinkPad Edge 15 - Manual (Page 102)

Table 30. BMGR32 parameters (continued)
Parameter Result
/INFOP
Display hard disk drive information (checks for 16 free sectors).
/M0
The Rescue and Recovery environment is located in the service partition.
/M1
The Rescue and Recovery environment is located in the C:\PARTITION (dual
boot Windows and Windows PE).
/M2
The Rescue and Recovery environment is located in the service partition with
DOS (dual boot Windows PE and DOS; Lenovo-branded or IBM-branded
preload Only).
/OEM
Computer is not an IBM branded or Lenovo-branded computer. This forces a
second check for the F11 (default) key press after POST. This may be required
for older IBM-branded systems. This is also the default setting for the OEM
version of the Rescue and Recovery program.
/Patchn
Used for installation program only to set a variable that the Master boot record
patch program can access.
Patchfilefilename
Used for installation program only to install the Master boot record patch.
/PRTC
Used for installation program only, to retrieve patch return code.
/IBM
System is an IBM branded or Lenovo-branded computer.
/Q
Silent.
/V
Verbose.
/R
Reboot computer.
/REFRESH
Reset partition table entries in data sector.
/THINK
Configure the boot manager to use the blue button on the keyboard to enter
the Predesktop Area.
/TOC tocvalue
Set the BIOS TOC location (16 characters that represent 8 bytes of data).
/U0
Show partition 0.
/U1
Show partition 1.
94 Rescue and Recovery 4.23 Deployment Guide