Lenovo ThinkPad Edge 15 - Manual (Page 96)

Table 27. RRcmd parameters (continued)
Command Result
Copy
Copy backups from one location to another. This command is also known as archive
and must include the location.
Rejuvenate
Rejuvenate operating system to the specified backup.
Delete
Delete backups. This command must include the location.
Changebase
Change files in all backups based on file.txt contents. Options in file.txt are:
A Add
D Delete
R Replace
Migrate
Create migration file from a backup.
Filter=filterfile
Files and folders that will be restored. This command is used only with the Restore
command.
Location=c
One or more of the following can be selected with the associated result:
L For primary local hard drive
U For USB hard drive
S For second local hard drive
N For network
C For CD/DVD Restore
name=abc
Where abc, is the name of the backup.
level=x
Where x is a number from 0 (for the base) to maximum number of incremental backups
(only used with the restore option. For backup commands, the level=x command is
only required if performing an administrator backup (equal to or greater than 100,
for example).
Notes:
1. To restore from the latest backup, do not provide this parameter.
2. All backup and restore features are routed through the service so that the
appropriate sequencing can be maintained, callbacks are performed, for example.
The backup command is replaced with the command-line options.)
88 Rescue and Recovery 4.23 Deployment Guide