Lenovo ThinkPad Edge 15 - Manual (Page 65)

Table 23. (continued)
Command Parameters Parameter Values and Examples
<temp_file_location> To specify the directory to where temporary
files are written, enter a fully qualified directory
name. You can specify a shared directory on
another system.
If you do not set this parameter, temporary
files are written to c:/InstDir/etc/data, where
c is the drive letter of the hard disk drive and
/InstDir/ is the directory where the applications
are installed.
<resolve_icon_links> To copy only those icons that have active
links, set to True. Otherwise, set the parameter
to False or leave it unspecified.
File-migration commands
System Migration Assistant processes file-migration commands in the following order: file inclusion
commands are performed first, then file exclusion commands are performed from the inclusion files.
System Migration Assistant selects and deselects files on the basis of the original location of files and folders
on the source computer. File redirection statements are stored in the profile and are interpreted during the
apply phase. File migration is recursive into sub-directories.
The processing of file and directory names is not case sensitive.
The following table contains information about the file-migration commands. All file migration commands
are optional.
Table 24.
Command Parameter Description Example
<FilesAndFolders> <run> Starts the process of a
command. The </run>
parameter ends the process
of a command. To capture or apply file migration, set
the parameter to True. Otherwise,
set the parameter to False or leave
it unspecified.
For example:
<FilesAndFolders>
<run>true</run>
</FilesAndFolders>
<Exclude_drives> <Drive> Specifies the drive letter to
exclude drives from being
scanned. For example:
<ExcludeDrives>
<Drive>D</Drive>
<Drive>E</Drive>
</ExcludeDrive>
Chapter 4 . Rejuvenation and migration 57