Lenovo ThinkPad Edge 15 - Manual (Page 67)

Table 24. (continued)
Command Parameter Description Example
<Inclusions> <SizeCompare>
<Operand>
<Size>
<Dest>
<Operation>
where
• <SizeCompare> is the
optional parameter to
select files based on
their size.
– <Operand> is
either LARGER or
SMALLER.
– <Size> is the file size
in MB.
• <Dest> is an optional
parameter that specifies
the name of the
destination folder on
the target system where
the files will be written.
• <Operation> is an
optional parameter
that specifies how the
file path is to be handled.
Specify either of the
following:
– P - preserves the
path of the file and
recreates the file on
the target system
starting at the location
specified by the
<Dest> parameter.
– R - removes the path
of the file and places
the file directly in the
location specified by
the <Dest> parameter.
Note: If the P or R
command is not used
in the <Operation>
tag, the default is to
leave the <Operation>
empty, for example,
<Operation></Operation>.
Example 2
<Inclusions>
<IncDescription>
<Descriptin>
C:\MyWorkFolder\*.*
</Decsription>
<DateCompare>
<Operand>
NEWER
</Operand>
<Date>07/31/2005</Date>
</DateCompare>
</IncDescription>
</Inclusions>
Example 3
<Inclusions>
<IncDescription>
<Description>
C:\MyWorkFolder/*.*
</Description>
<SizeCompare>
<Operand>
SMALLER
</Operand>
<Size>200</Size>
</SizeCompare>
</IncDescription>
</Inclusions>
Example 4
<Inclusions>
<IncDescription>
<Description>
C:\MyWorkFolder\*.*
</Description>
<Dest>
D:\MyNewWorkFolder
</Dest>
<Operation>
</Operation>
<IncDescription>
</Inclusions>
Chapter 4 . Rejuvenation and migration 59