Lenovo ThinkPad Edge 15 - Manual (Page 63)

Table 23. (continued)
Command Parameters Parameter Values and Examples
<Applications> <Application>
For a list of all the applications that are
supported, see the ThinkVantage System
Migration Assistant User's Guide located at:
http://www.lenovo.com/thinkvantage
For example: To capture all applications
supported, set $(all).
<Applications>
<Application>
Lotus Notes
</Application>
<Application>
Microsoft Office
</Application>
</Applications>
or
<Applications>
<Application>
$(all)
</Application>
</Applications>
<Registries> • <Registry>
• <hive>
• <keyname>
• <value>
To capture or apply the registry settings,
specify the hive, keyname and value as the
parameters in the command file. For example:
<HKEY_CURRENT_USER> <Control
Panel><Colors><Menu Bar><236.233.218>.
<IncUsers> <UserName> To capture all user profiles, set $(all) or use *\*
as a wild card for all users. Otherwise, specify
users individually.
The following wild cards are available.
• *\* for a variable length wild card
• % for a fixed length wild card (1 character)
For example:
<IncUsers>
<UserName>
Administrator
</UserName>
<UserName>
domain\Kelli
</UserName>
</IncUsers>
<ExcUsers> <UserName> To exclude users from the migration process,
specify the domain and user name of the user.
The following wild cards are available.
• * for a variable length wild card
• % for a fixed length wild card (1 character)
Chapter 4 . Rejuvenation and migration 55