Lenovo ThinkPad Edge 15 - Manual (Page 111)

Table 36. Computer Configuration>Rescue and Recovery>Settings (continued)
Policy Setting Sub-Setting Description
Backup PreBackup PreShow4 Show or hide the command that
is run prior to incremental backup
number 4. Default: Show.
Backup PreBackup Pre5 Command to run prior to incremental
backup number 5. Include the full
path to the file, if that path is not in
the environment variable. Default:
None.
Backup PreBackup PreParameters5 The parameter that passes the
command that is run prior to
incremental backup number 5.
Default: None.
Backup PreBackup PreShow5 Show or hide the command that
is run prior to incremental backup
number 5. Default: Show.
Backup PostBackup Post Command to run after a backup
concludes. Include the full path
to the file, if that path is not in the
environment variable. Default: None.
Backup PostBackup PostParameters The parameter that passes the
command that is run following the
conclusion of a backup. Default:
None.
Backup PostBackup PostShow Show or hide the command that is
run following a backup. Default:
Show.
Backup PostBackup Post0 Command to run after the base
backup concludes. Include the full
path to the file, if that path is not in
the environment variable. Default:
None.
Backup PostBackup PostParameters0 The parameter that passes the
command that is run following the
conclusion of the base backup.
Default: None.
Backup PostBackup PostShow0 Show or hide the command that
is run following the base backup.
Default: Show.
Backup PostBackup Post1 Command to run after incremental
backup number 1 concludes. Include
the full path to the file, if that path
is not in the environment variable.
Default: None.
Backup PostBackup PostParameters1 The parameter that passes the
command that is run following the
conclusion of incremental backup
number 1. Default: None.
Backup PostBackup PostShow1 Show or hide the command that is
run following incremental backup
number 1. Default: Show.
Appendix A. Administrative tools 103