Lenovo ThinkPad Edge 15 - Manual (Page 69)

Selecting files during the capture phase
This section contains three examples of code used to select files during the capture phase.
Example 1
The following code example selects all files with a .doc extension (Microsoft Word documents) and relocates
them in the "d:\My Documents" directory. It then excludes all files that are in the d:\No_Longer_Used
directory.
<Inclusions>
<IncDescription>
<Description>*:\*.doc/s</Description>
<Dest>d:\My Documents</Dest>
<Operation>r</Operation>
</IncDescription>
</Inclusions>
<Exclusions>
<ExcDescription>
<Description>d:\No_Longer_Used\</Description>
</ExcDescription>
</Exclusions>
Example 2
The following code example selects the contents of the drive, excluding all files located in the root of the d
drive and all files with a .tmp extension.
<Inclusions>
<IncDescription>
<Description<d:\*.*/s<\Description>
</IncDescription>
</Inclusions>
<Exclusions>
<ExcDescription>
<Description>d:\*.*</Description>
</ExcDescription>
<ExcDescription>
<Description>*:\*.tmp/s</Description>
</ExcDescription>
</Exclusions>
Example 3
The following code example selects the entire contents of the c drive, excluding all files located in the
directory: %windir%. The %windir% directory specifies the Windows directory.
<Inclusions>
<IncDescription>C:\*.*/s</Description>
</Inclusion>
<Exclusions>
<ExcDescription>
<Description>/Description>
</ExcDescription>
</Exclusions>
Chapter 4 . Rejuvenation and migration 61