Lenovo ThinkPad Edge 15 - Manual (Page 112)

Table 36. Computer Configuration>Rescue and Recovery>Settings (continued)
Policy Setting Sub-Setting Description
Backup PostBackup Post2 Command to run after incremental
backup number 2 concludes. Include
the full path to the file, if that path
is not in the environment variable.
Default: None.
Backup PostBackup PostParameters2 The parameter that passes the
command that is run following the
conclusion of incremental backup
number 2. Default: None.
Backup PostBackup PostShow2 Show or hide the command that is
run following incremental backup
number 2. Default: Show.
Backup PostBackup Post3 Command to run after incremental
backup number 3 concludes. Include
the full path to the file, if that path
is not in the environment variable.
Default: None.
Backup PostBackup PostParameters3 The parameter that passes the
command that is run following the
conclusion of incremental backup
number 3. Default: None.
Backup PostBackup PostShow3 Show or hide the command that is
run following incremental backup
number 3. Default: Show.
Backup PostBackup Post4 Command to run after incremental
backup number 4 concludes. Include
the full path to the file, if that path
is not in the environment variable.
Default: None.
Backup PostBackup PostParameters4 The parameter that passes the
command that is run following the
conclusion of incremental backup
number 4. Default: None.
Backup PostBackup PostShow4 Show or hide the command that is
run following incremental backup
number 4. Default: Show.
Backup PostBackup Post5 Command to run after incremental
backup number 5 concludes. Include
the full path to the file, if that path
is not in the environment variable.
Default: None.
Backup PostBackup PostParameters5 The parameter that passes the
command that is run following the
conclusion of incremental backup
number 5. Default: None.
Backup PostBackup PostShow5 Show or hide the command that is
run following incremental backup
number 5. Default: Show.
Backup Backup Local Enable or disable Backup Local as
a selected destination for backup.
Default: Enabled.
104 Rescue and Recovery 4.23 Deployment Guide