Lenovo ThinkPad Edge 15 - Manual (Page 158)

The following table provides information for System Health and Help.
Table 42. System Health and Help
Module Description
Health Allows you to monitor system health, and provides health status.
Logs Allows you to view log files.
Installing certificates
The user interface for the Virtualization Module for Antidote Delivery Manager program is Web-based and
uses CA (Certificate Authority) Root certificates to communicate. A default certificate is installed. You can
use this default certificate, customize the default certificate, or use your own custom certificate. These
certificates must be installed to communicate with the Virtualization Module for Antidote Delivery Manager
program. The following steps provide instructions on how to install certificates:
1. Open a Web browser such as Windows Internet Explorer.
2. Type the following IP address in the address field: 192.168.0.12.
3. On the Security Alert from Internet Explorer, click View Certificate.
4. On the General Tab, Click Install Certificate, or if you are working with an existing certificate, make
a note of the Serial Number in the Value field on the Details tab.
5. Type your User ID and password in the User ID and password fields on the Authentication prompt.
Note: If your User ID and password does not authenticate, you will be continuously prompted for
your User ID and password. The User ID and password requested at the Authentication prompt will
need to be set up on the server computer. This User ID and password is set up in User Accounts
located on the Control Panel in Windows. Virtualization Module for Antidote Delivery Manager requires a
password set for this User Account.
6. From the main menu in the Virtualization Module for Antidote Delivery Manager program, click Manage
and Configure.
7. In the Upload field, click Browse, and browse to your certificate. Certificates will have the file extension
of .pfx.
8. Type in your password.
9. Click Submit. A prompt will display letting you know the file was uploaded successfully.
10. From the Virtualization Module for Antidote Delivery Manager menu, click Restart Target PC. This
reboots the server computer and engages the installed certificate.
Commands
The following commands are used to control the Virtualization Module for Antidote Delivery Manager
program.
• /E - enables all networking (/ip and /nm ignored).
• /D - disables all networking (/ip and /nm ignored).
• /A - allows connection to defined IP address or domain name only.
• /IP - allows connection to specified ip_address only.
• /DN - allows connection to specified domain_name (DNS name) only.
• /NM - net_mask (optional) default = 255.255.255.255.
NETWK
The NETWK command controls the operation of all networks.
150 Rescue and Recovery 4.23 Deployment Guide