Lenovo ThinkPad Edge 15 - Manual (Page 147)

Table 37. Antidote Delivery Manager commands (continued)
Commands Description
STATUS [/QUERY locationmessage_name | /CLEAR
location]
The STATUS /QUERY command can be used to determine if a script
has been run, or is queued to be run. The location value must be
one of the following:
• FAILthe message has already run and failed
• SUCCESSThe message has been completed successfully
• WORKThe message is currently being run, or will run next time
Antidote Delivery Manager is run.
• CACHEThe message is queued to run.
The STATUS/CLEAR command will clear the location specified.
Return values are:
• 0 = if the specified message found or the command completed
successfully
• 1 = if the specified message not found or the command failed
MAILMAN [/RRU | RESET | /MB
mailbox | /STATUS
This command checks for mailbox locations and processes fixes
found there. The following list provides the parameters:
• RRUThis parameter runs .ZAP which is stored in the Post Restore
directory after each restore.
• RESETThis parameter halts processing of the currently running
script.
Note: This parameter should only be used in extenuating
circumstances since usage is likely to cause errors.
• STATUSThis parameter returns a bitmask to indicate the current
condition of the Antidote program. Return values are:
– 0 = Antidote is configured properly
– 1 = No mailbox defined
– 2 = There are no keys defined, or NOSIG=1 is not defined
Supported Microsoft commands
The following table provides supported Microsoft commands.
Table 38. Supported Microsoft commands
Commands Description
ATTRIB.EXE
Displays or changes file attributes.
CACLS.EXE
Displays or modifies access control list (ACLs) of files.
CHKDSK.EXE
Checks a disk and displays a status report.
COMP.EXE
Compares the contents of two files or sets of files.
Appendix B. Antidote Delivery Manager 139