Konica Minolta bizhub 4750 User Manual

Page 115

Advertising
background image

3.2

Using LPR/Port9100 connection for installation

3

[Applied Functions]

3-10

5

Select [Local printer attached to this computer], then click [Next >].

% Clear the [Automatically detect and install my Plug and Play printer] check box.

The [Select a Printer Port] page appears.

6

Click [Create a new port:], then select [Standard TCP/IP Port] as the [Type of port:].

7

Click [Next >].

[Add Standard TCP/IP Printer Port Wizard] starts.

8

Click [Next >].

9

In the [Printer Name or IP Address:] box, enter the IP address for the machine, and then click [Next >].

% If the [Additional Port Information Required] window appears, go to Step 10.

% If the [Finish] screen appears, go to Step 13.

10

Select the [Custom] check box, then click [Settings:].

11

Change the settings according to the port, and then click [OK].

% For an LPR connection, select the [LPR] check box, then enter "Print" in [Queue Name:]. You must

discriminate between upper and lower case letters when entering it.

% For the Port 9100 connection, select the [Raw] check box, then enter a RAW port number ([9100]

by default) in [Port Number:].

12

Click [Next >].

13

Click [Finish].

[Add Printer Wizard] appears.

14

Click [Have Disk...].

15

Click [Browse...].

16

Select the folder on the CD-ROM containing the desired printer driver, then click [Open].

% Select the folder according to the printer driver, operating system, and language to be used.

Selectable printer drivers: PCL driver and PS driver

17

Click [OK].

The [Printers] list appears.

18

Click [Next >].

19

Follow the on-screen instructions to carry out operations.

% To use a network connection, perform a test print after the network settings have been configured.

20

Click [Finish].

21

After finishing the installation, make sure that the icon for the installed printer is displayed in the [Printers
and Faxes] window.

22

Remove the CD-ROM from the CD-ROM drive.

Installation of the printer driver is then completed.

Advertising
This manual is related to the following products: