Konica Minolta bizhub 4750 - Manual (Page 41)

1.5 Available operations in Administrator mode 1
[Applied Functions] 1-35
[Limiting Access to Destination] - [Restrict User Access]
To display: Administrator mode - [Security] - [Limiting Access to Destination] - [Restrict User Access]
Specify the functions for which user operation is restricted.
[Auto Logout]
To display: Administrator mode - [Security] - [Auto Logout] - [Auto Logout]
If you do not operate this machine for a given period of time after you log in to Web Connection, you will
automatically be logged out. If necessary, you can change the time period before you are automatically
logged out.
[Send Client Certificate] Select whether or not to encrypt the authentication information using a certifi-
cate for this machine, if necessary.
This setting can be configured if the following conditions are satisfied:
•
The certificate is registered on this machine
• [EAP-TTLS], [PEAP], or [Server Specification] is selected from [EAP Type].
[Server ID] To verify CN of the certificate, enter the server ID (using ASCII characters of up
to 64 bytes).
[Encryption Strength] If [EAP-TLS], [EAP-TTLS], [PEAP], or [Server Specification] is selected from
[EAP Type], select an encryption strength for encryption by TLS, if necessary.
•
[Medium]: Keys that are more than 56 bits in length are used for communi-
cation.
• [High]: Keys that are more than 128 bits in length are used for communica-
tion.
[Medium] is specified by default.
[Network Stop] Specify the delay time between the start of an authentication process and the
end of network communication, if necessary.
If an authentication process does not succeed within the specified time, all net-
work communication will stop.
To specify the delay time, set [Network Stop] to [Enable], and enter the delay
(sec.) in [Limit Time].
To restart the authentication process after network communication stopped,
reboot this machine.
[Disable] is specified by default.
Item Description
Item Description
[Registering and
Changing Addresses] Select whether or not to allow the user to register or change destinations.
[Allow] is specified by default.
Item Description
[Admin Mode Logout
Time] Select a time period until the user is automatically logged out of the adminis-
trator mode.
[10] minutes is specified by default.
[User Mode Logout
Time] Select a time period until the user is automatically logged out of the user mode.
[60] minutes is specified by default.