Konica Minolta bizhub 4750 User Manual

Page 94

Advertising
background image

[Applied Functions]

2-29

2.9

Registering a destination

2

[Auto Color]

Select whether or not to automatically specify the color mode according to the
original.
[On] is specified by default.

[Color Mode]

Select whether or not to scan in gray scale or in black and white when an orig-
inal is scanned in black and white.
[Grayscale] is specified by default.

[Separate Scan]

When there are too many original sheets that cannot be loaded into the ADF
at the same time, if you want to load them in several batches and handle them
as one job, select [On].
[Off] is specified by default.

[Density]

Adjust the density (Dark or Light) to scan the original.
[0] is specified by default.

[Background Removal]

Adjust the density of the background area when printing originals with colored
background (newspaper, recycled paper, etc.) or originals that are so thin that
text or images on the back would be scanned.
[0] is specified by default.

[Sharpness]

Sharpen the edges of images to improve legibility. Smoothen the rough con-
tours of images or sharpen blurred images.
[0] is specified by default.

[Scan Size]

Specify the size of the original.

[E-mail Notification]

Select [On] to use the E-mail notification function. Also, enter the destination
E-mail address.
[Off] is specified by default.

[Original Direction]

When scanning a double-sided original, you can specify the original loading di-
rection so that the vertical direction is set correctly after scanning.
[Left] is specified by default.

[2-Sided Binding Direc-
tion]

Select the biding position of original when scanning both sides of the original.
[Auto] is specified by default.

[Special Original]

Select [Long Original] to scan a long original.
[Normal] is specified by default.

[Timer TX]

To set a time to start fax transmission, select [On]. Also, specify when to start
fax transmission.
[Off] is specified by default.

[Password TX]

To send fax with a password to a destination for which fax destinations are re-
stricted by passwords (Closed Network RX enabled), select [On]. Also, enter
the password.
[Off] is specified by default.

[F-Code]

Select [Enable] to enable F-Code TX. Also enter [SUB Address] and [Pass-
word].
[Disable] is specified by default.

[Document Name]

Change the file name of the scanned original data (using up to 30 characters).

[Frame Erase]

Erases an area of an identical specified width along the four sides of an origi-
nal. You can erase the four sides of the original to different widths.
[Off] is specified by default.

Settings

Description

Advertising
This manual is related to the following products: