Konica Minolta bizhub 4750 - Manual (Page 22)

[Applied Functions] 1-16
1.5 Available operations in Administrator mode 1
[Notification Settings] - [Total Counter Notification Settings]
To display: Administrator mode - [System] - [Notification Settings] - [Total Counter Notification Settings]
The counter information managed by this machine can be sent to the registered E-mail address. The infor-
mation is useful for gaining an overall picture of the machine operating status.
Tips
After the setting is complete, a test notification is sent to the registered mail addresses when you click [Send
Now].
[Job Log] - [Job Log Settings]
To display: Administrator mode - [System] - [Job Log] - [Job Log Settings]
Configure settings for obtain a job log.
[Paper Empty] Select whether or not to send a notification when the tray is out of paper.
[Enable] is specified by default.
[Paper Jam] Select whether or not to send a notification when a paper jam occurs.
[Enable] is specified by default.
[Maintenance] Select whether or not to send a notification when periodic inspection is re-
quired.
[Enable] is specified by default.
[Toner Out] Select whether or not to send a notification when toner runs out.
[Enable] is specified by default.
[Output Tray Full] Select whether or not to send a notification when the output tray is overloaded.
[Enable] is specified by default.
[Fuser Unit End] Select whether or not to send a notification when the finishing unit must be re-
placed.
[Enable] is specified by default.
[Operator Call] Select whether or not to send a notification when an error occurs.
[Enable] is specified by default.
[Service Call] Select whether or not to send a notification when a service call occurs.
[Enable] is specified by default.
[Job Complete] Select whether or not to send a notification when a job is completed.
[Enable] is specified by default.
[Job Error] Select whether or not to send a notification when a job has terminated abnor-
mally.
[Enable] is specified by default.
Item Description
Item Description
[Model Name] Enter a model name to be included in the notification mail message (using AS-
CII characters of up to 20 bytes).
[Schedule Setting] Specify the notification schedule by day, week, or month.
Up to two schedules can be registered. You can use different schedules for dif-
ferent purposes.
[Register Notification
Address] Enter a destination E-mail address.
Select the notification schedule for each destination.
Item Description
[Job Log] Select whether or not to obtain a job log.
[Disable] is specified by default.