Ipp settings, Ftp settings] - [ftp server settings – Konica Minolta bizhub 4750 User Manual
Page 57
1.5
Available operations in Administrator mode
1
[Applied Functions]
1-51
[IPP Settings]
To display: Administrator mode - [Network] - [IPP Settings] - [IPP Settings]
Configure the operating environment for IPP printing.
[FTP Settings] - [FTP Server Settings]
To display: Administrator mode - [Network] - [FTP Settings] - [FTP Server Settings]
To use application software with which the FTP server of this machine is used to communicate, configure the
FTP server.
[Port Number]
If necessary, change the HTTP server port number.
[80] is specified by default.
[SSL/TLS]
Select whether or not to use SSL for communication with the HTTP server.
[Disable] is specified by default.
[Port Number (SSL)]
If necessary, change the SSL communication port number.
[443] is specified by default.
Item
Description
Item
Description
[IPP Print]
Select whether or not to use IPP printing.
[Enable] is specified by default.
[Accept IPP Job]
Select whether or not to enable reception of the IPP job.
[Enable] is specified by default.
[Printer Name]
If necessary, enter a printer name of this machine (using up to 127 bytes).
[Printer Location]
If necessary, enter the installation location of this machine (using up to 127
bytes).
[Printer Information]
If necessary, enter the printer information of this machine (using up to 127
bytes).
[Printer URI]
Displays the URI of the printers that can print data using the IPP.
[Operational Support]
Select whether or not to allow the following IPP operations.
•
[Print Job]: Allows a print job.
•
[Validate Job]: Allows you to check a valid job.
•
[Cancel Job]: Allows you to cancel a job.
•
[Get Job Attributes]: Allows you to obtain job attributes.
•
[Get Jobs]: Allows you to obtain a list of job attributes.
•
[Get Print Attributes]: Allows you to obtain printer attributes.
[ON] (selected) is specified by default in every case.
[IPP Authentication]
Select the IPP authentication method.
[Requesting-user-name] is specified by default.
[User Name]
Enter the user name (using ASCII characters of up to 20 bytes, excluding a co-
lon (:)).
This entry is required if you have selected [Basic] or [Digest] in [IPP Authenti-
cation].
[Password]
Enter the password (using ASCII characters of up to 20 bytes).
To enter (change) the password, select the [Change Password] check box,
then enter a new password.
This entry is required if you have selected [Basic] or [Digest] in [IPP Authenti-
cation].
[Realm]
Enter the domain (realm) (using ASCII characters of up to 127 bytes).
This entry is required if you have selected [Digest] in [IPP Authentication].
Item
Description
[FTP Server]
Select whether or not to use the FTP server function of this machine.
[Enable] is specified by default.
[Port Number]
If necessary, change the FTP server port number.
[21] is specified by default.