Konica Minolta bizhub 4750 - Manual (Page 61)

1.5 Available operations in Administrator mode 1
[Applied Functions] 1-55
[Web Service Settings] - [Common Settings]
To display: Administrator mode - [Network] - [Web Service Settings] - [Common Settings]
Configure settings to detect this machine using the Web service.
[Web Service Settings] - [Printer Settings]
To display: Administrator mode - [Network] - [Web Service Settings] - [Printer Settings]
Configure settings to perform Web service printing.
[Web Service Settings] - [Scanner Settings]
To display: Administrator mode - [Network] - [Web Service Settings] - [Scanner Settings]
Configure settings to perform Web service scanning.
[Bonjour Settings]
To display: Administrator mode - [Network] - [Bonjour Settings] - [Bonjour Settings]
Configure the Bonjour operating environment when using this machine in the Mac OS control.
Item Description
[Friendly Name] Enter the name of this machine to be displayed when this machine is searched
for using the Web service through a computer (using up to 127 bytes).
[Secure Mode] Select whether or not to use the SSL for Web service communication.
[Disable] is specified by default.
Item Description
[Print Function] Select whether or not to use the WS print function.
[Enable] is specified by default.
[Printer Name] Enter the name of this machine when using it as a WS printer (using up to 127
bytes, excluding !, \, and ,).
[Printer Location] If necessary, enter the installation location of the printer (using up to 127
bytes).
[Printer Information] If necessary, enter the printer information (using up to 127 bytes).
Item Description
[Scan Function] Select whether or not to use the WS scan transmission function.
[Enable] is specified by default.
[Scanner Name] Enter the name of this machine when using it as the WS scanner (using up to
127 bytes).
[Scanner Location] If necessary, enter the installation location of the scanner (using up to 127
bytes).
[Scanner Information] If necessary, enter the scanner information (using up to 127 bytes).
[Connection Timeout] Change the time-out time to limit a communication with the computer if nec-
essary.
[120] sec. is specified by default.
Item Description
[Bonjour] Select whether or not to use Bonjour.
[Enable] is specified by default.
[Printer Name] Enter a Bonjour name that is to be displayed as the name of connected device
(using up to 63 bytes).
[Priority Protocol] Select the protocol preferentially used for connection by Bonjour.
[RAW Port] is specified by default.