Konica Minolta bizhub 4750 - Manual (Page 27)

1.5 Available operations in Administrator mode 1
[Applied Functions] 1-21
When you have selected [LDAP]
[Authentication] - [Temporarily Save Authentication Information]
To display: Administrator - [Security] - [Authentication] - [Temporarily Save Authentication Information]
To temporarily save authentication information in the main unit against a case where an external authentica-
tion server shuts down, select [Enable]. [Enable] is specified by default.
If necessary, use [Reconnection Settings] to change the time to reconnect to the authentication server.
- [Reconnect for every login]: Connects to the authentication server when authentication is carried out on
this machine. If the authentication server is in the shutdown state when authentication is carried out on
this machine, first confirm that the authentication server is down, and use the temporarily saved authen-
tication information to log in to this machine.
- [Set Reconnect Interval]: Connects to the authentication server based on the time specified in [Recon-
nection Time] to check the status of the authentication server. If the authentication server is in the shut-
down state, use the authentication information temporarily saved in the main unit to log in.
[Authentication] - [Scan to Home Settings]
To display: Administrator mode - [Security] - [Authentication] - [Scan to Home Settings]
Select whether or not to enable the Scan to Home function.
[Disable] is specified by default.
[Default Context] Enter the default NDS context name (using ASCII characters of up to 191
bytes).
Item Description
[No.] Registration number of the authentication server.
[Name] Enter the name of your authentication server (using ASCII characters of up to
32 bytes).
[Server Type] Displays the type of authentication server.
[Server Address] Enter your LDAP server address.
Use one of the following formats.
•
Example of host name entry: "host.example.com"
• Example of IP address (IPv4) entry: "192.168.1.1"
• Example of IP address (IPv6) entry: "fe80::220:6bff:fe10:2f16"
[Port Number] If necessary, change the LDAP server port number.
[389] is specified by default.
[SSL] Select whether or not to use SSL communication.
[Disable] is specified by default.
[Port Number (SSL)] If necessary, change the SSL communication port number.
[636] is specified by default.
[Search Base] Specify the starting point to search for a user (using ASCII characters of up to
255 bytes).
The range from the entered origin point, including the following tree structure,
is searched.
Example of entry: "cn=users,dc=example,dc=com"
[Timeout] If necessary, change the time-out time to limit a communication with the LDAP
server.
[60] sec. is specified by default.
[Authentication Meth-
od] Select the authentication method to log in to the LDAP server.
Select one appropriate for the authentication method used for your LDAP serv-
er.
[Digest-MD5] is specified by default.
[Search Attribute] Enter the search attribute that is used in user account search.
[uid] is specified by default.
Item Description