Konica Minolta bizhub 4750 - Manual (Page 116)

[Applied Functions] 3-11
3.3 Using IPP connection for installation 3
3.3 Using IPP connection for installation
Operations required to use this function (for administrators)
Configure the IPP operating environment.
For details on how to configure the settings, refer to page 1-51.
Tips
You can enhance security by encrypting communication between the computer and this machine with SSL
when IPP printing is carried out on this machine (IPPS printing). To use SSL communications, a certificate
must be registered in advance. For details on how to configure the settings, refer to page 2-34.
In Windows 8/8.1/Server 2012/Server 2012 R2
0 Administrator privileges are required to perform this task.
1
Insert the printer driver CD-ROM into the CD-ROM drive of the computer.
2
Display the printer window.
% In Windows 8.1, click [ ] in the Start window, then click [Control Panel] - [Hardware and Sound] -
[View devices and printers].
% In Windows 8, right-click the Start window, then click [All apps] - [Control Panel] - [Hardware and
Sound] - [View devices and printers].
% In Windows Server 2012/Server 2012 R2, open the Start window, then click [Control Panel] - [Hard-
ware] - [View devices and printers].
3
Select Add a printer.
The [Add Printer] wizard appears.
4
In the window showing the detected printer, click [The printer that I want isn't listed].
5
In [Select a shared printer by name], enter the URL for the machine in the following format, then click
[Next].
% http://<IP address of this machine>/ipp
Example: http://192.168.1.20/ipp
% When specifying to use IPPS printing, enter "https://[host name].[domain name]/ipp".
For [host name].[domain name], specify the host name and domain name registered for the DNS
server being used.
% If the certificate for the machine is not the one issued by the certifying authority, you must register
the certificate for the machine on the Windows 8/8.1/Server 2012/Server 2012 R2 system as the
certificate by "Trusted Root Certification Authorities" for the computer account.
% When registering the certificate in the machine, check that the certificate shows [host name].[do-
main name] as the common name.
6
Click [Have Disk...].
7
Click [Browse...].