Date/time settings] - [time adjustment settings, Machine settings – Konica Minolta bizhub 4750 User Manual

Page 19

Advertising
background image

1.5

Available operations in Administrator mode

1

[Applied Functions]

1-13

[Date/Time Settings] - [Time Adjustment Settings]

To display: Administrator mode - [System] - [Date/Time Settings] - [Time Adjustment Settings]

Using the NTP (Network Time Protocol) server, you can automatically adjust the date and time of this ma-
chine.

Register the NTP server used. To periodically adjust the date and time by connecting to the NTP server, spec-
ify an interval for adjusting the date and time.

Tips

If time zone is specified, the standard time obtained from the server adjusted to your time zone is specified
as the correction time.

[Date/Time Settings] - [Daylight Saving Time Settings]

To display: Administrator mode - [System] - [Date/Time Settings] - [Daylight Saving Time Settings]

Specify the daylight saving time for the current time.

[Machine Settings]

To display: Administrator mode - [System] - [Machine Settings] - [Machine Settings]

Register device information of this machine, such as the name, installed place, and information of the admin-
istrator.

Item

Description

[Time Adjustment]

To automatically adjust the date and time of this machine using the NTP server,
select [Enable].
[Disable] is specified by default.

[NTP Server Address]

Enter the NTP server address.
Use one of the following formats.

Example of host name entry: "host.example.com"

Example of IP address (IPv4) entry: "192.168.1.1"

Example of IP address (IPv6) entry: "fe80::220:6bff:fe10:2f16"

[Port Number]

If necessary, change the NTP server port number.
Normally, you can use the original port number.
[123] is specified by default.

[Time Zone]

Select a time zone (time difference from world standard time) to suit your en-
vironment.
[GMT] is specified by default.

[Adjustment Time]

Displays the latest date and time at which time correction was performed by
connecting to the NTP server.

Item

Description

[Daylight Saving Time]

Select [Enable] to use daylight saving time.
Also enter the time to be adjusted for daylight saving time (in minutes).
[Disable] is specified by default.

Item

Description

[Device Name]

Enter the name of this machine (using up to 127 bytes).
The name specified here is used as a part of the subject of Internet fax.

[Device Location]

Enter the location of this machine (using up to 127 bytes).

[Device Information]

Enter the information of this machine (using up to 127 bytes).

[Administrator Name]

Enter the machine administrator name (using up to 127 bytes).

[Administrator E-mail
Address]

Enter the E-mail address of the machine administrator (using ASCII characters
of up to 320 bytes).

[Do Startup Page]

Select whether or not to print the start page when this machine is turned on.
[Off] is specified by default.

Advertising
This manual is related to the following products: