Ip address filtering, Ieee802.1x, Ip address filtering] -34 [ieee802.1x] -34 – Konica Minolta bizhub 4750 User Manual

Page 40

Advertising
background image

[Applied Functions]

1-34

1.5

Available operations in Administrator mode

1

[IP Address Filtering]

To display: Administrator mode - [Security] - [IP Address Filtering]

You can specify both IP addresses that are permitted to access this machine and those that are refused ac-
cess to the machine.

Tips

IP address filtering is not supported in the IPv6 environment.

[IEEE802.1X]

To display: Administrator mode - [Security] - [IEEE802.1X]

Using IEEE802.1X authentication, you can connect devices that are only authorized by administrators to the
LAN environment.

If IEEE802.1X authentication is installed in your environment, configure the following settings.

Item

Description

[Access Permission Ad-
dress]

Select [Enable] to specify IP addresses that are permitted to access. Also enter
the range of IP addresses permitted to access.
If a single IP address is permitted to access, you can only enter the address in
one side of the range.

Example of entry: "192.168.1.1"

[Disable] is specified by default.

[Access Refuse Ad-
dress]

Select [Enable] to specify IP addresses refused to access. Also enter the range
of IP addresses.
If a single IP address is refused to access, you can only enter the address in
one side of the range.

Example of entry: "192.168.1.1"

[Disable] is specified by default.

[Exclusion Protocol]

Select the check box for the protocol that you want to exclude from access re-
striction using the IP address filtering.
[OFF] (not selected) is specified by default.

Item

Description

[IEEE802.1X]

Select [Enable] to use the IEEE802.1X authentication.
[Disable] is specified by default.

[EAP Type]

Select an EAP authentication method.

[Server Specification]: The EAP type provided by the authentication server
will be used for authentication. Configure the supplicant settings as re-
quired for this machine according to the EAP type that is provided by the
authentication server.

Do not select [None].

[None] is specified by default.

[User ID]

Enter the user ID (using ASCII characters of up to 128 bytes).
This user ID is used for all EAP types.

[Password]

Enter the password (using ASCII characters of up to 128 bytes).
The password is used for all EAP types other than [EAP-TLS].
To enter (change) the password, select the [Change Password] check box,
then enter a new password.

[TTLS Anonymous
Name]

Enter the anonymous name used for EAP-TTLS authentication (using ASCII
characters of up to 128 bytes) if [EAP Type] is set to [EAP-TTLS] or [Server
Specification].
[anonymous] is specified by default.

[TTLS Authentication
Type]

Select an internal authentication protocol for EAP-TTLS if [EAP Type] is set to
[EAP-TTLS] or [Server Specification].
[MS-CHAPv2] is specified by default.

Advertising
This manual is related to the following products: