Default settings] - [tray mapping settings, Default settings] - [pcl settings, Default settings] - [postscript settings – Konica Minolta bizhub 4750 User Manual

Page 45

Advertising
background image

1.5

Available operations in Administrator mode

1

[Applied Functions]

1-39

[Default Settings] - [Tray Mapping Settings]

To display: Administrator mode - [Print] - [Default Settings] - [Tray Mapping Settings]

Specify the paper tray to be used for printing when a print job is received by the printer driver of other com-
panies.

[Default Settings] - [PCL Settings]

To display: Administrator mode - [Print] - [Default Settings] - [PCL Settings]

Configure the PCL settings.

[Default Settings] - [PostScript Settings]

To display: Administrator mode - [Print] - [Default Settings] - [PostScript Settings]

Configure the PostScript print settings.

Item

Description

[Tray Mapping Mode]

Select whether or not to enable the tray mapping.
[Off] is specified by default.

[Logical Tray 0] to [Log-
ical Tray 9]

Assigns logical trays 0 to 9 to physical trays.

Item

Description

[PCL Settings]

Specify the default values for PCL printing.

[Font Number]

Specify the default font. The displayed font number corresponds to the PCL
font list.
[0] is specified by default.

[Symbol Set]

Select the font symbol set to be used.
[PC-8] is specified by default.

[Lines Per page]

Enter the number of lines of text data to be printed on one page.
The default value depends on the region the machine is used in.

[Font Point Size]

Enter the font size (in points) for proportional fonts (with different widths for
each character).
[12.00] is specified by default.

[Font Pitch Size]

Enter the font width (in pitches) for typewriter fonts (with the same width for
each character).
[10.00] is specified by default.

[CR/LF Mapping]

Select whether or not to replace the line feed codes when printing text data.
When you want to replace the line feed codes, select the replacement method.
[CR=CR LF=LF] is selected by default.

Item

Description

[PostScript Settings]

Specify the default values for PostScript print settings.

[Wait Timeout]

Specify the time-out period after it is judged as PS error.
If you select [0], time-out will not work.
[0] sec. is specified by default.

[PS Protocol]

Select the protocol that is used for PS data communication.
If you select [Auto], an appropriate protocol is automatically determined from
the PS print jobs.
[Auto] is specified by default.

[Print to PS Error]

Select whether or not to print error information when an error occurs during PS
rasterization.
[Off] is specified by default.

Advertising
This manual is related to the following products: