Konica Minolta bizhub 4750 - Manual (Page 52)

[Applied Functions] 1-46
1.5 Available operations in Administrator mode 1
[TCP/IP Settings] - [RAW Port Settings]
To display: Administrator mode - [Network] - [TCP/IP Settings] - [RAW Port Settings]
Specify a RAW port number required for Port9100 printing.
[TCP/IP Settings] - [DNS Settings]
To display: Administrator mode - [Network] - [TCP/IP Settings] - [DNS Settings]
Configure the DNS settings when a DNS server is used.
[E-mail Settings] - [E-mail TX (SMTP)]
To display: Administrator mode - [Network] - [E-mail Settings] - [E-mail TX (SMTP)]
Configure the settings on the E-mail transmission function of this machine.
Item Description
[RAW Port] Select whether or not to use the RAW port.
[Enable] is specified by default.
[Port Number] If necessary, change the RAW port number.
[9100] is specified by default.
[Bidirectional] Select whether or not to enable bidirectional communication of the RAW port.
[Disable] is specified by default.
Item Description
[Host Name] Enter the host name of this machine (using ASCII characters of up to 63 bytes,
including only - for symbol marks).
If your DNS server does not support the Dynamic DNS function, register the
host name of this machine on the DNS server.
[Domain Name] When not automatically retrieving the default domain name, enter the default
domain name of this machine (using ASCII characters of up to 63 bytes, includ-
ing only hyphens (-) and periods (.) for symbol marks).
[DNS Server Address
(IPv4)] Enter the address (IPv4) of your DNS server. You can register up to three ad-
dresses.
[DNS Server Address
(IPv6)] Enter the address (IPv6) of your DNS server. You can register up to three ad-
dresses.
[Search Domain Name] If the search domain name is not automatically retrieved, enter the search do-
main name of this machine (using ASCII characters of up to 251 bytes, includ-
ing only hyphens (-) and periods (.) for symbol marks).
[Dynamic DNS] Select whether or not to enable the Dynamic DNS function.
When your DNS server supports the Dynamic DNS function, the specified host
name can be automatically registered on the DNS server or changes can be
automatically updated as long as [Enable] is selected.
[Disable] is specified by default.
Item Description
[E-mail TX (SMTP)] Configure the settings to send an E-mail from this machine.