Http settings] - [http server settings, Http settings] - [http server settings] -50 – Konica Minolta bizhub 4750 User Manual

Page 56

Advertising
background image

[Applied Functions]

1-50

1.5

Available operations in Administrator mode

1

[HTTP Settings] - [HTTP Server Settings]

To display: Administrator mode - [Network] - [HTTP Settings] - [HTTP Server Settings]

Configure the settings on the HTTP server function of this machine.

[Server Address]

Enter the LDAP server address.
Use one of the following formats.

Example of host name entry: "host.example.com"

Example of IP address (IPv4) entry: "192.168.1.1"

Example of IP address (IPv6) entry: "fe80::220:6bff:fe10:2f16"

[Port Number]

If necessary, change the LDAP server port number.
[389] is specified by default.

[SSL/TLS]

Select whether or not to use SSL for communication with the LDAP server.
[Disable] is specified by default.

[Port Number (SSL)]

If necessary, change the SSL communication port number.
[636] is specified by default.

[Search Base]

Specify the starting point to search for a user to be authenticated (using ASCII
characters of up to 255 bytes).
The range from the entered origin point, including the following tree structure,
is searched.
Example of entry: "cn=users,dc=example,dc=com"

[Timeout]

If necessary, change the time-out time to limit a communication with the LDAP
server.
[60] sec. is specified by default.

[Max. Search Re-
sult]

Change the maximum number of destinations to be displayed as search re-
sults, if necessary.
[100] is specified by default.

[Authentication
Method]

Select the authentication method to log in to the LDAP server.
Select one appropriate for the authentication method used for your LDAP serv-
er.
[anonymous] is specified by default.

[Login Name]

Log in to the LDAP server, and enter the login name to search for a destination
(using up to 255 bytes).

[Password]

Enter the password (using up to 128 bytes).
To enter (change) the password, select the [Change Password] check box,
then enter a new password.

[Domain Name]

Enter the domain name to log in to the LDAP server (using ASCII characters of
up to 64 bytes).
If [GSS-SPNEGO] is selected in [Authentication Method], enter the domain
name of Active Directory.

[Select Server Au-
thentication Meth-
od]

Select the LDAP server authentication method.

[Set Value]: Use the settings of [Login Name], [Password], and [Domain
Name].

[Dynamic Authentication]: The system prompts you to enter the user name
and password when Address Search (LDAP) is carried out.

[Set Value] is specified by default.

[Use Referral]

Select whether or not to use the referral function, if necessary.
Make an appropriate choice to fit the LDAP server environment.
[On] is specified by default.

[Search Condition
Attributes]

Select attributes to be specified when the LDAP search is carried out. The set-
ting can be switched between [Name] (cn) and [Nickname] (displayName).
[Name] is specified by default.

[Initial Setting for
Search Details]

Specify LDAP search conditions.
[OR] is specified by default in every case.

Item

Description

Item

Description

[HTTP Server]

Select whether or not to use this machine as an HTTP server.
If you select [Disable], you cannot use Web Connection.
[Enable] is specified by default.

Advertising
This manual is related to the following products: