Konica Minolta bizhub PRESS C1060 - Manual (Page 153)

● Quality
● Color
See also:
Configuration parameters on page 143
Print parameters on page 145
Quality parameters on page 147
Color parameters on page 151
Configuration parameters
Note: The IPDS workflow is available only with the Trans Pack.
Parameter Option Description
Setup Setup Provides the following options:
● Emulation—This option defines the characteristics of
the IPDS printer emulated by the IC-309 print controller.
When the host inquires to determine which IPDS printer
is connected, the IC-309 print controller reports this
value to the host in a device reply. Certain emulations
are used for more than one printer. The default option is
4322. This is used for the majority of emulations,
including that of the IBM 4400 Thermal Printer as well as
all other IBM Infoprint printers not listed explicitly in this
option. The IPDS Resolution can be set to 240, 300,
480, or 600 dpi for the 4322 emulation.
Note: For many of the emulations, the resolution is
limited by the printer, and the IPDS Resolution is
ignored.
● IPDS Resolution—This option specifies the press
supported resolution. You can select: Auto, 240, 300,
480, or 600.
● Valid printing area—Select Border, Move, Edge, or,
Fit
● Report to host on—To control the exceptions and
intervention reporting, select from the following options:
○ VPA Exception
○ Undefined character exception
○ Intervention required
IPDS data traces Enables you to Save IPDS traces.
General Defaults Default code page The selected code page is used as the default character
encoding for the job, unless the IPDS stream already
contains a code page.
Configuration parameters 143