Konica Minolta bizhub PRESS C1060 - Manual (Page 195)

Parameter Option Description
Image
halftone
screen Provides the following options:
Note: If you select the Dot 2, Line 1 or Line 2 options for a job that
will be printed, make sure that you also select Permission in the
Image Quality Setting screen on the printer's touch panel.
● Dot 1—Applies a high dot-type screen
● Dot 2—Applies a medium dot-type screen
● Line 1—Applies a high line-type screen
● Line 2—Applies a medium line-type screen
● Stochastic—Stochastic screening differs from conventional
halftone screening in that high ink density results in more dots,
not bigger dots. Low ink density produces fewer dots, not smaller
dots. As stochastic screening involves millions of minuscule dots,
many more than are used for conventional halftone screening.
Notes:
● If the Stochastic option is selected, make sure that the Text
Thinning, Text Smoothing, and Halftone Text Enhancement
options are not selected and that the Resolution option is set to
600 dpi.
● If the Resolution option is set to 1200 dpi, make sure that Image
screening and Text/graphics screening options use the same
settings.
Quality tab in the job parameters window 185