Konica Minolta bizhub PRESS C1060 - Manual (Page 210)

Parameter Option Description
Marks and
barcodes Enables you to add a mark set that was defined in the Resource
Center, and define on which sheets the marks appear.
Provides the following options:
● All—Prints the marks on each sheet in your job.
● Repetition—Prints the marks according to the frequency that you
define—for example, if you set the repetition to 3, the marks will
be printed every third sheet.
● Sheet Range—Prints the marks according to the sheet range that
you defined. Provides the following options:
○ Type a range of sheets with a hyphen between the starting
and ending numbers in the range—for example,
1-5 .
○ Type a range of sheets with a hyphen or comma between the
starting and ending numbers, and where the last sheet=n.
● 1,n (first and last sheets)
● n–1 (the sheet before last)
● n-<integer> (the integer stands for the number of sheets
before the last sheet)
Note: The sheet range option is applicable to finishing marks,
registration marks and barcodes. If Sheet Range is selected
and a range is not entered, the job will not be submitted/
saved.
Slip Sheet Slip sheets
between
copies Prints slip sheets with your job. If a job is collated, the slip sheets are
printed between sets. If a job is not collated, the slip sheets are
printed between groups.
● Same as job—Uses the same paper stock that is defined for the
job.
● Paper Profile—Enables you to select the paper profile on which
to print the slip sheet.
○ Paper size—Select the desired paper size.
● Tray—The tray in which the specified paper stock is loaded.
● Frequency—Determines how often to print a slip sheet. after
each copy or after each 6 copies, and so on. The default is set to
1.
200 Chapter 11—Job parameters