Konica Minolta bizhub PRESS C1060 - Manual (Page 199)

Parameter Option Description
Emulate
source paper
tint Emulates the original paper tint if the tint is included in the profile.
Notes:
● If you select Emulate source paper tint, you cannot select
Preserve pure CMY colors.
● If the job is simplex, only the front side will be printed using the
tint emulation.
● If you select Emulate source paper tint, Absolute is used as the
rendering intent.
Black Point
Compensation Activates the Black Point Compensation algorithm, which extends
the gray axis of a profile and increases detail in the darkest color
areas.
CMYK device
link Enables you to select a CMYK device link profile.
RGB source
profile Enables you to select an RGB source profile.
RGB
rendering
intent Provides the following options (for information on each option, see
the descriptions of the CMYK rendering intent options in this table):
● Auto
● Relative
● Absolute
● Saturation
● Perceptual
Apply CMYK
emulation To convert RGB elements according to the selected CMYK emulation
method, select the Apply CMYK emulation. The RGB elements
receive the same look as the CMYK elements, creating a unified
appearance.
RGB device
link Enables you to select an RGB device link source profile.
Destination
Profile Provides the following options:
● Linked—Uses the destination profile that was linked using the
Media and Color Manager in the Resource Center.
● C1060/C1070/C1070P_Press—Uses the predefined destination
profile that is most suitable for the press.
Color
adjustments Brightness Controls the brightness level for the job. The options range from
Lightest, which makes the job 15% lighter, to Darkest, which makes
the job 15% darker.
Brightness is generally used to make last-minute adjustments to the
job after proofing. By changing the Brightness setting, you can
control how light or dark your output appears.
Color tab in the job parameters window 189